Laminate Indexing Station
Model # - Laminate Indexing Station
Serial # - 382417
Power Supply - 460 Volt, 3 Phase, 60 Hertz
Condition - NEW IN-STOCK
Categories - Material Handling
Application: To receive stock on center line from glue spreader, locate on belt conveyor, and provide ready access to face and backer sheets to be laid-up with glued stock is then transferred to press for bonding. It rides on a floor track and is driven by motor to move out and over the lay-up area when the operator presses a switch. The track remains out for a set time, then automatically returns to the starting position. Shuttle Mechanism with clamping device rides on linear bearings to carry the front edge of the glued panel out over the Laminate. Fingers support the leading edge of the panel with a minimum disturbance of the bottom glue line. The fingers pivot down and release the glued stock to the bottom laminate, with soft drop feature.
Weight limit 1,200lbs. Pass Line Height: In-Feed Pass Line Height 45 ½”, Outfeed Height 36″
Power Driven Wide Belt Conveyor: To support the backer sheet while glued stock is properly indexed. Conveyor is mounted on casters to ensure the board is always indexed to the fixed, right guide for different stock widths.
Variable Speed AC Inverter: For Conveyor Speed 10 to 100 F.P.M.
Push Button Two Stage Conveyor Speed Control
NEMA 12 Enclosure with main power disconnect switch and over-current protection: 460 Volt, 3 Phase, 60 Hertz, 24VDC Control Circuits
Operator Side on Right with reset and master start push button